FUTABA T10J - Model Name Setting (MDL Name); User Name Setting (USR Name)

43
Commonfunction
Function
Method
①Callthemenuscreenfromthe
homescreenbypressingthe+key
for1second.
＋
② Select
fromthemenuwiththeJog
key.
③Openthesettingscreenby
pressingtheJogkey.
（1second）
Callingthesettingscreen
①Movethecursortothemodel
namedigityouwanttochangeby
pressingthe+keyor‒key.
＋ −
or
②Movethecursortothe
candidatecharacteryou
wanttochangewiththe
Jogkey.
③ Changethecharacterbypressing
theJogkey.
Setthemodelnamebyrepeatingsteps①to③above.
Resetmethod：
Whenthecursorismovedtoanydigitofthemodelnameby+keyor‒keyandthe
JogkeyispressedinthestateinwhichthecursorwasmovedtoRESETbyJogkey,themodelname
returnstoitsinitialsetting.
Modelname
MDL-NAME
Modelname ／ Username
(Common)
Modelnamesetting（MDLNAME）
Thisfunctionassignsanametothemodeldata.Themodelnameisdisplayedonthetoprowofthe
homescreen.Thisservestopreventmodelmemorymistakesifthecurrentaircraftnameorother
nameisentered.
● Upto10characterscanbeset.
Usernamesetting（USRNAME）
Theusernamedisplayedonthehomescreencanbeset.(Whenausernameisnotset,theFutaba
logoisdisplayed)WhenthehomescreendisplayischangedtoUSR-NAMEbyPARAMETER,theset
usernameisdisplayedonthehomescreen.
● Upto10characterscanbeset.
Modelname
Username
（Reset）
（Candidatecharacters）
● Charactersthatcanbeentered;
Numeric/uppercasealphabet/
lowercasealphabet
"MDL-NAME"
A model name is inputted into each model in
T10J.
User name is inputted into T10J.
0'/1$0(