FUTABA T10J - Range Setting; Setting State; To Setting Value; Set Value Memorization

164
Glider
（ELE → Camber）
(/(ڀ&$0%51250
5$7(5$7(
$,/㌣㌣
$,/㌣㌣
0,;㌣,1+
6:㌣6Z$㌣'2:1
5$1*(㌣
(/(ڀ&$0%51250
5$7(5$7(
$,/㌣㌣
$,/㌣㌣
0,;㌣,1+
6:㌣6Z$㌣'2:1
5$1*(㌣
● Settingthatinhibitscambermixingneartheelevatorcenterposition.Settingso
thatcambermixingisperformedonlywhentheelevatorswereoperatedgreatly
ispossible.
RANGEsetting
■ Settingstate
①Selectthe"0%"itemnextto
RANGEwiththeJogkey.
Canbeeitherupordown.Whenset
todown,theupsideisalsosetbythe
sameamount.
Whenelevatoroperationexceedstherange,
thestickpositionisdisplayedandmixingis
performed.
● WhenaRANGEnumberisselectedandthe
Jogkeyispressedfor1second,RANGEis
resetto0%andnormalmixingisperformed.
■ Tosettingvalue
②Movetheelevatorsticktothepositionyou
wantoperationtobegin.
■ Setvaluememorization
③PresstheJogkeyfor1second.
Holdthestickin
position.
●
WhenMIXissettoACT,the
amountofMIX(s)accordingto
stickoperationisdisplayed.