FUTABA 3PM-2.4GHZ User Manual

Thank you for purchasing a Futaba 3PM-2.4GHz system.
Before using your 3PM-2.4GHz system, read this manual carefully in order to use your R/C set safely.
After reading this manual, store it in a safe place.
Application, Export, and Modification
1. This product may be used for models only. It is not intended for use in any application other than the
control of models for hobby and recreational purposes.
2. Exportation precautions:
(a) When this product is exported from the country of manufacture, its use is to be approved by the laws govern-
ing the country of destination for devices that emit radio frequencies. If this product is then re-exported to other
countries, it may be subject to restrictions on such export. Prior approval of the appropriate goverment authori-
ties may be required. If you have purchased this product from an exporter outside your country, and not the
authorized Futaba distributor in your country, please contact the seller immediately to determine if such export
regulations have been met.
(b) Use of this product with other than models may be restricted by Export and Trade Control Regulations, and
an application for export approval must be submitted.
3. Modification, adjustment, and replacement of parts: Futaba is not responsible for unauthorized
modification, adjustment, and replacement of parts on this product. Any such changes may void the
warranty.
Compliance Information Statement (for U.S.A.)
This device, trade name Futaba Corporation of America, model number R603FF, complies with part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
The responsible party of this device compliance is:
Futaba Service Center
3002 N Apollo Drive Suite 1, Champaign, IL 61822 U.S.A.
TEL (217)398-8970 or E-mail: support@futaba-rc.com (Support)
TEL (217)398-0007 or E-mail: service@futaba-rc.com (Service)
Battery Recycling (for U.S.A.)
The RBRC
TM
SEAL on the (easily removable) nickel-cadmium battery contained in
Futaba products indicates that Futaba Corporation of America is voluntarily participating
in an industry program to collect and recycle these batteries at the end of their useful
lives, when taken out of service within the United States. The RBRC
TM
program provides
a convenient alternative to placing used nickel-cadmium batteries into the trash or mu-
nicipal waste system, which is illegal in some areas.
You may contact your local recycling center for information on where to return the spent battery.
Please call 1-800-8-BATTERY for information on Ni-Cd battery recycling in your area. Futaba Cor-
poration of America's involvement in this program is part of its commitment to protecting our environ-
ment and conserving natural resources.
RBRC
TM
is a trademark of the Rechargeable Battery Recycling Corporation.
Warning: This product contains a chemical known to cause cancer and birth defects (or other
reproductive harm).

FUTABA 3PM-2.4GHZ Specifications

General

Brand	FUTABA
Model	3PM-2.4GHZ
Category	Remote Control
Language	English

Summary

Application, Export, and Modification

Exportation Precautions

Details regulations and requirements for exporting the product from the country of manufacture.

Modification Restrictions

States that unauthorized modifications void the warranty and are not the responsibility of Futaba.

Compliance Information

FCC Compliance Statement

Confirms the device complies with FCC Rules Part 15 for operation.

Responsible Party Contact

Provides contact information for Futaba Service Center regarding compliance.

Battery Recycling

RBRC Program Participation

Explains Futaba's voluntary participation in the RBRC program for battery recycling.

For Your Safety As Well As That Of Others

Explanation of Symbols

Defines symbols used in the manual for safety warnings and instructions.

2.4GHz System Precautions

Covers safety rules for 2.4GHz system operation, including potential interference.

Operation Precautions

Details safe practices for operating the R/C system, including prohibited actions.

NiCd Battery Handling Precautions

Provides essential safety guidelines for handling NiCd batteries.

Storage and Disposal Precautions

Instructions for safely storing and disposing of the R/C system and batteries.

Other Precautions

Covers important safety considerations regarding plastic parts and genuine accessories.

Before Using

System Features and Contents

Highlights key system features and lists all package contents.

Transmitter Controls and Adjustments

Identifies transmitter parts and explains operation of controls and adjustments.

Battery and Charging

Details battery replacement, handling, and charging procedures for the transmitter.

Receiver Installation

Covers receiver connections, antenna placement, and safety precautions.

Installation

Installation Precautions

Details critical safety measures for connecting servos, damping vibration, and suppressing noise.

Initial Set-Up

Transmitter-Receiver Linking

Procedure for pairing the transmitter and receiver using unique ID codes.

Fail Safe Setup

Instructions for setting the fail safe position for the steering and throttle servos.

Transmitter Preparations

Checks and initial settings for model number and modulation mode before function setup.

Car Installation Setup Procedure

Recommended order for setting up servos when installed in a car.

Function Map

Display Overview

Shows the initial display upon powering on the transmitter.

Functions

EPA and Trim Adjustments

Adjusts steering/throttle angles, dual rates, ATL, subtrims, and trims for precise control.

Steering and Throttle Response

Tunes steering speed, servo response (EXP), and throttle acceleration for optimal performance.

Advanced Control Functions

Configures ABS braking, brake mixing, programmable mixing, and fail safe for safety.

Model and System Configuration

Manages model data, timers, system modes, switch/lever functions, and LED settings.

Reference

Product Ratings

Specifications and ratings for the transmitter and receiver.

Optional Parts

Information on available optional parts for the 3PM-2.4G system.

Troubleshooting and Error Resolution

Guides for diagnosing and resolving common operating problems and error displays.

Repair Information

Provides instructions on how to request repair service for the system.