Need help?Do you have a question about the FUTABA 3PL-2.4G and is the answer not in the manual?
General| Frequency | 2.4 GHz |
|---|---|
| Modulation | FHSS |
| Channels | 3 |
| Battery Type | AA |
| Number of Batteries | 4 |
| Receiver | R203GF |
| Model Type | Surface |
Explains symbols used throughout the instruction manual.
Safety guidelines specific to the 2.4GHz FHSS radio system.
Essential safety measures and warnings for operating the R/C system.
Guidelines for safe storage, disposal, and battery handling.
Additional safety advice for beginners and general operation.
Lists the items included in the Futaba 3PL-2.4G system package.
Identifies transmitter components and provides handling instructions.
Step-by-step instructions for replacing the transmitter's AA batteries.
Details on the Electronic Speed Controller connections, applicable motors, and operation.
Instructions for connecting receiver, servos, and ESC according to model type.
Proper placement and installation of the receiver antenna for optimal range.
Warnings and guidelines for correct assembly to prevent damage and loss of control.
Procedure for pairing the transmitter and receiver using the link switch.
Adjusts steering/throttle trims for neutral position and steering sensitivity.
Controls servo operation direction and manages multiple model memories.
Limits servo travel for steering, throttle, and channel 3 for precise control.
Configures CH4, ABS, mixing, model names, and fail-safe for enhanced operation.
Details ESC reverse cancellation, protection circuits, and LED status indicators.
Visual overview of model selection, servo reversing, and trim settings.
Visual guide to end point, ABS, mixing, and fail-safe settings.
Technical specifications for transmitter, receiver, servos, and ESC.
Steps to diagnose and resolve common system operational problems.
Interpretation of LCD error messages indicating system faults.
Procedures for requesting repair services and warranty claims.
To Next Page
