FUTABA 3VCS User Manual

2
Thank you for purchasing the Futaba 3VCS.
Prior to operating your 3VCS, please read this manual thoroughly and use
your system in a safe manner.
After reading this manual store it in a safe place.
Application, Export and Reconstruction
1. Use this product in surface models only.
The product described in this manual is subject to regulations of the Ministry of
Radio/Telecommunications and is restricted under Japanese law to such pur-
poses.
2. Exportation Precautions
(a) When this product is exported from Japan, its use is to be approved by the
Radio Law of the country of the destination.
(b) Use of this product with other than models may be restricted by Export and
Trade Control Regulations. An application for export approval must be submit-
ted.
3. Modification, adjustment and replacement of parts.
Futaba is not responsible for unauthorized modification, adjustment and re-
placement of parts of this product.
THE FOLLOWING STATEMENT APPLIES TO THE
RECEIVER (FOR U.S.A.)
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions.
(1) This devise may not cause harmful interference, and
(2) This devise must accept any interference received, including interference
that may cause undesired operation.
See the glossary on page (P110-112) for the definition’s of the special terms
used in this manual.

FUTABA 3VCS Specifications

General

Brand	FUTABA
Model	3VCS
Category	Remote Control
Language	English

Summary

Application, Export, and Reconstruction

Exportation Precautions

Precautions regarding exporting the product from Japan and trade regulations.

Modification and Part Replacement

Futaba's responsibility for unauthorized modifications, adjustments, and part replacements.

U.S.A. Receiver Statement

RBRCTM Battery Recycling

Safety Precautions and Before Use

Key Features, Nomenclature, and Setup

Overview of transmitter features, parts identification, and basic setup procedures.

Installation and Initial Set-Up

Connections, Safety, and Preparations

Guide on connecting components, safety measures, and preliminary transmitter checks.

Function Navigation

Menu and Direct Selection Methods

How to select functions via menus or quick access buttons.

Transmitter Functions Explained

Core Control and Adjustment Functions

Adjusting servo travel, sensitivity, speed, mixing, and brake systems.

Advanced Functions and System Settings

Model management, switch assignments, mode selection, calibration, and system setup.

Throttle and Safety Functions

Throttle modes, acceleration, fail-safe, and engine cut functions.

Reference and Troubleshooting

Technical Specs, Troubleshooting, and Glossary

Specifications, common problems, error messages, solutions, and definitions of terms.