FUTABA 3VCS - Model Reset

77
Functions
(Initial screen)
Use the or
button to select the
menu screen.
Press the button.
Use the or
button to select the
function.
Press the button.
Calling the setup screen
* When the direct call button is set,
the setup screen is also called by the
following method:
MENU SELECT
DIRECT SEL
Press the and
button simulataneously.
Press the button set
at this function.
* Calling from menu screen
(Initial screen)
MENU
Model Reset/MDL-RES
This functions resets the contents of the currently called model memory to the initial
value. However, it does not reset the Adjuster function (ADJUSTER), System func-
tion (SYSTEM), Lap list (LAP-LIST), User name (USR-NAME), Direct selection
button (DIRECT CUSTOMIZE), and HRS/PCM/PCM select (MOD-MODE).
Model Reset
1 (Reset execution)
Press the (+) and (-) buttons simultaneously for
about 1 second. ("COMPLETE!" blinks)
2 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
Model No.
01~10: Model memory in
the Transmitter
11~20: Model memory in
the CAMPac-16K
*Current model No.
Model Reset/MDL-RES