FUTABA 3VCS User Manual

92
Functions
(Initial screen)
Use the or
button to select the
menu screen.
Press the button.
Use the or
button to select the
function.
Press the button.
Calling the setup screen
* When the direct call button is set,
the setup screen is also called by the
following method:
MENU SELECT
DIRECT SEL
Press the and
button simulataneously.
Press the button set
at this function.
* Calling from menu screen
Use the or button to
select the setup item.
* blinks at the current
setup item.
(Initial screen)
MENU
System function/SYSTEM
The graphic liquid crystal screen display mode, buzzer sound, pilot lamp display
mode and initial screen display mode can be set.
The system function setup items cannot be set for each model.
- Liquid crystal screen backlighting display mode setup (OFF, ON at button opera-
tion, normally ON)
- Setting of ON time (1~30 secs) when [ON at button operation] was selected above.
- Liquid crystal screen contrast adjustment (20 steps)
- Buzzer sound tone adjustment (OFF, 100 steps)
- Pilot lamp display color setup (OFF, 7 colors)
- Initial screen display mode setting ("Futaba" display, timer display, servo display,
Users name)
Setup items
LHT-MODE : Backlighting mode
LHT-TIME : Backlighting time
CONTRAST : Contrast
BUZ-TONE : Buzzer tone
LED-MODE : LED color
DISP-SEL : Initial screen mode
*When "KEY-ON" was selected at
backlighting mode, "ACT" is displayed
and the backlighting time setting be-
comes effective.
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Press the (+) and (-) buttons simulta-
neously (approx. 1 sec) to return to
the initial screen.
System function/SYSTEM

FUTABA 3VCS Specifications

General

Brand	FUTABA
Model	3VCS
Category	Remote Control
Language	English