FUTABA 3VCS - Page 92

93
Functions
System function setup
1 (Setting the liquid crystal backlighting mode)
Use the (UP) or (DN) button to select setup item
"LHT-MODE", and select the mode by pressing
the (+) or (-) button.
"KEY-ON" : Fixed time backlighting ON after button operated.
"ALWAYS" : Backlighting always ON
"OFF" : Backlighting OFF
(Setting liquid crystal backlighting time)
Use the (UP) or (DN) button to select setup item
"LHT-TIME", and use the (+) and (-) buttons to
set the ON time.
- When "KEY-ON" is set at the preceding item, this ON time becomes
effective.
(Adjusting the liquid crystal contrast)
Use the (UP) or (DN) button to select setup item
"CONTRAST" and use the (+) and (-) buttons to
adjust the screen contrast.
- Adjust to an easy-to-see contrast.
(Adjusting the buzzer tone)
Use the (UP) or (DN) button to select setup item
"BUZ-TONE" and use the (+) and (-) buttons to
adjust the tone.
- Decide by referring to the tone at adjustment.
(Changing the LED display color)
Use the (UP) or (DN) button to select setup item
"LED-MODE" and use the (+) and (-) buttons to
select the color.
- Select your favorite color while viewing the LED color.
(Changing the initial screen display mode)
Use the (UP) or (DN) button to select setup item
"DISP-SEL) and use the (+) and (-) buttons to
select the display mode.
"Futaba" : "Futaba" logo is displayed on the initial screen.
"TIMER" : Timer screen is displayed on the initial screen.
"SRV-VIEW" : Servo operation graph is displayed on the initial screen.
"USR-NAME" : User name
2 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
Backlight mode
KEY-ON, ALWAYS, OFF
Backlighting time
1~30
Initial value: 10
Contrast
-10~0~+10
Initial value: 0
Buzzer tone
OFF, 1~75~100
Initial value: 75
LED color
(OFF), BLUE, RED, PURPLE,
GREEN, SKY BULUE, ORANGE,
PINK
After reset : ORANGE
Initial value : SKY BLUE
Initial screen mode
Futaba, TIMER,SRV-VIEW,USR-
NAME
System function/SYSTEM