FUTABA 3VCS User Manual

87
Functions
(Initial screen)
Use the or
button to select the
menu screen.
Press the button.
Use the or
button to select the
function.
Press the button.
Calling the setup screen
* When the direct call button is set,
the setup screen is also called by the
following method:
MENU SELECT
DIRECT SEL
Press the and
button simulataneously.
Press the button set
at this function.
* Calling from menu screen
(Initial screen)
MENU
Channel 3 Position/CH3-POSI(Channel 3 system)
Use this function to set the servo position of the channel 3.
This setting is linked to transmitter knob (KNB). When the knob is assigned to an-
other function, set the channel 3 position with this screen.
Setup Item
RATE: Channel 3 posiion
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Press the (+) and (-) buttons simulta-
neously (approx. 1 sec) to return to
the initial screen.
Channel 3 adjustment
1 (Position adjustment)
Use the (+) and (-) buttons to adjust the channel
3 position.
- This position is linked with the knob (KNB).
2 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
Channel 3 position
-100~0~+100%
Initial value: 0%
Channel 3 Position/CH3-POSI(Channel 3 system)

FUTABA 3VCS Specifications

General

Brand	FUTABA
Model	3VCS
Category	Remote Control
Language	English