Need help?Do you have a question about the FUTABA Mega Tech 3PK and is the answer not in the manual?
General| Brand | FUTABA |
|---|---|
| Model | Mega Tech 3PK |
| Category | Remote Control |
| Language | English |
Rules to follow during operation to prevent accidents and ensure safe use.
Adjusting the neutral position of servos for each channel.
Reversing the direction of servo operation.
Actions to avoid during operation to prevent damage or loss of control.
Essential steps for safe battery use and charging.
Items and actions to avoid when handling Ni-Cd batteries.
Enabling smooth vehicle starts on slippery surfaces.
Adjusting steering servo response for better control.
Using the built-in timer for lap timing and race management.
Detailed steps for connecting and charging the battery.
Critical safety warnings related to battery charging.
Steps to prepare a new or used data pack for use.
Ensuring secure and proper connection of all components.
Protecting the receiver from vibration and moisture.
Proper routing and placement of the receiver antenna.
Verifying RF signal output for proper transmitter function.
Ensuring the modulation mode matches the receiver type.
Verifying steering trim operation and neutral position.
Verifying throttle trim operation and neutral position.
Checking and setting the steering dual rate.
Checking and setting the throttle ATL (Adjustable Travel Limit).
Recommended function setup order for car installation.
Setting the maximum steering angle for left and right turns.
Adjusting brake side operation amount during throttle use.
Notes on servo strain and proper steering setup.
Adjusting the steering angle for the left turn.
Adjusting the steering angle for the right turn.
Setting EPA for forward and brake sides of the throttle.
Setting EPA for the up and down sides of the 3rd channel.
To Next Page
