Need help?Do you have a question about the FUTABA 7PXR and is the answer not in the manual?
General| Model | 7PXR |
|---|---|
| Category | Remote Control |
| Channels | 7 |
| Frequency | 2.4GHz |
| Telemetry | Yes |
| Model Memory | 40 |
| Display | Color LCD |
| Battery | 6.6V |
| Compatibility | S-FHSS |
| Receiver | R334SBS |
Details on the intended use, limitations, and precautions regarding exporting and modifying the product.
Precautions for using the T7PXR receiver and servos under specific system conditions.
Essential guidelines for safe operation, including environmental considerations and proper power sequencing.
Important safety measures for handling and charging Ni-MH, Ni-Cd, and LiFe batteries.
Overview of the key features and functionalities of the T7PXR system.
Lists the items included in the product package for verification.
Identification and description of the various parts and controls of the T7PXR transmitter.
Step-by-step instructions for replacing the batteries in the transmitter.
Diagrams and instructions for connecting receivers and servos to the system.
Critical safety warnings and guidelines to follow during the installation process.
Procedure to check the receiver system and RF output settings for compatibility.
Instructions for changing the receiver system and linking the transmitter and receiver.
Guide on navigating through the transmitter's menu structure.
Settings related to the receiver, including telemetry function ON/OFF.
Function to reverse the operating direction of servos for transmitter channels.
Adjusts the maximum steering angle and servo travel for each channel.
Configuration for fail-safe modes and battery voltage monitoring.
Adjusts dual rate for steering and ATL rate for throttle/brake.
Assigns functions to push switches, dial, and steering wheel.
Adjusts steering sensitivity around the neutral position for better control.
Anti-lock braking system function for improved cornering and stability.
Function to cut off the engine or motor via a switch.
Settings for Futaba S.BUS/S.BUS2 servos, including parameter adjustments.
Connects to Futaba motor controllers (ESCs) for data changes via PC or software.
Displays and sets receiver power supply battery voltage, including alarms.
Displays GPS satellite data, current distance, speed, and reference position.
Allows selection and management of up to 40 model memories.
Procedure to correct mechanical offsets for steering and throttle.
Instructions for updating the transmitter software via NFC or microSD card.
Procedure for updating the program of Futaba receivers from the T7PXR.
Resets the transmitter to factory settings if model data is damaged.
Information on system errors, backup errors, and forgotten power-off alarms.
List and description of available optional parts for the T7PXR.
Information on warranty coverage and how to contact Futaba for repair services.
To Next Page
