Home screen
Menu screen Racing menu screen Engine cut
Warning display
,IWKHSRZHUVZLWFKLV
WXUQHGRQZKLOHWKH
HQJLQHFXWVZLWFKLVRQ
DQDXGLEOHDODUPZLOOEH
heard. Immediately set
WKHHQJLQHFXWVZLWFKWR
2))
Engine cut ON/OFF is indicated
on the home screen for a few
seconds.
It is displayed in the home
screen, when the engine cut is
ON.
105
Function
Engine cut
Engine cut
:KHQWKHVZLWFKLVSUHVVHGWKHWKURWWOHVHUYRZLOOPRYHWRWKHSUHVHWSRVLWLRQZLWKRXWUH-
JDUGWRWKHWKURWWOHWULJJHUSRVLWLRQ7KLVIXQFWLRQLVFRQYHQLHQWZKHQXVHGWRFXWWKHHQJLQH
RIERDWVHWF7KHVZLWFKVHOHFWIXQFWLRQ6HHSDJH
(Preparation)
- Use the switch setting function to the "Switch
select". (page 71)
When the switch is not set, "A switch is not
assigned" is displayed. Tap [Switch select] to
display the switch selection screen and set the
switch.
Engine Cut function adjustment
:KHQWKHWULJJHUUDWLRSDJHLVVHWWRWKHEUDNHVLGHIXQFWLRQZLOOQRWRSHUDWH
The preset position set here is the linkage reference. Set the linkage so that the carbure
-
tor is fully closed in the preset adjustment range, and the engine stops. The full throttle
position is set by
"
advance
"
RIWKH HQG SRLQWIXQFWLRQ$GMXVW WKH LGOLQJ SRVLWLRQZLWK
throttle trim.
When the trigger ratio was set to 100:0
To Next Page
Loading...
Need help?
General
