Caution
Please do not grasp the transmitter’s antenna while driving.
Doing so may degrade the quality of the RF transmission to the model.
The antenna position can be changed in the direction, as shown in the figure. However, please do not ap-
ply unnecessary force or shock.
The internal cable may be damaged; thus, transmitting distance decreases, and it may cause malfunction.
There might be a small glitch when the antenna of the transmitter is brought close to servos,
ESCs, or other peripheral devices.
This is not an issue, but please keep this symptom in mind, especially when setting up.
Cannot rotate more than
90˚.If rotated forcibly, the
antenna will be damaged.
Antenna
Antenna
30
Before Using
Non-telemetry LED (telemetry OFF sign)
:KHQ UDFH UHJXODWLRQV LQKLELW WKH WHOHPHWU\
IXQFWLRQ DQ LQGLYLGXDO/('OLJKWV ZKHQWKH
WHOHPHWU\IXQFWLRQLV2))WRFRQ¿UPWKDWWKH
telemetry function is not operating.
Non-telemetry LED
(Lit when telemetry function is OFF)
Antenna Moving Range
Handling the antenna and card slot and receiver
About The Transmitter Antenna
If the antenna is set to the 45˚
and 90˚ vertical position, the
range of the radio waves may be
greater than in the horizontal po-
sition. (Different depending on the
conditions)
To Next Page
Loading...
Need help?
General
