Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Setting
- Tap (ON)/(OFF).
164
Function
Telemetry: Temperature
7KLVVFUHHQGLVSOD\VDQGVHWVWKHWHPSHUDWXUHLQIRUPDWLRQIURPDQ6%67WHOHPHWU\
WHPSHUDWXUHVHQVRUVROGVHSDUDWHO\7KHWHPSHUDWXUHRIWKHHQJLQHPRWRUDPSHWFRIWKH
FKDVVLV ZKLOH UXQQLQJFDQ EH YLHZHG DW WKH WUDQVPLWWHU :KHQ WKH WHPSHUDWXUH EHFRPHV
KLJKHURUORZHUWKDQWKHVHWYDOXHLWFDQEHDQQRXQFHGE\DQDODUPDQGYLEUDWLRQ
* A temperature sensor must be installed in the model car. Install and connect the sensor following the
sensor instruction manual.
Telemetry
Current temperature
The minimum and maximum the
when powering ON are shown.
Limit temperature setting
(Temperature that sounds
an alarm)
Alarm and vibrator ON/OFF and
type setting (The
arrow indicates
that an alarm is generated when the
speed drops below the set value and
the
arrow indicates that an alarm is
generated when the speed exceeds
the set value.)
Telemetry
1
(Limit adjustment)
Tap the "
" [
Limit] or "
" [
Limit]. Value input buttons appear on
the screen.
Use the [+] or [-] button to adjust the limit voltage.
2
(Alarm and vibrator function setup)
Tap the "
"/
"
"
[Alarm] type and select [Inhibit], [Buzzer]or
[Voice].
"Inhibit": No audible alarm/ "Buzzer": Audible alarm/ "Voice": Voice alarm
Tap the "
"/
"
"
[Vibrator] type and select [Inhibit], [Type 1],
[Type 2], or [Type 3].
"Inhibit": No active vibration
"Type 1": Continuous vibration
"Type 2": Intermittent vibration for a long time
"Type 3": Intermittent vibration for a short time
3
(Speech function setup)
Tap the "Voice" (ON) or (OFF) to select ON/OFF.
"OFF": No voice guide
"ON": Information loaded by voice
4
When finished, return to the Telemetry screen by pressing the HOME button.
Alarm and Vibrator function setup
The Speech function (ON/OFF)
Setting
- Tap alarm type.
Inhibit/Buzzer/Voice
Setting
- Tap Vibrator type.
Inhibit/Type 1/Type 2/Type 3
*The voice guide loading inter-
val is set by sensor menu.