FUTABA 3pv-2.4g - Advanced Control Settings; Channel-4 Reversing and Exponential

21
Channel-4 Servo Reversing

REV-CH4

Channel-4 Servo Reverse
NOR: Normal
REV: Reverse
Direction change
This function is used to change the
sensitivity of the steering servo around
the neutral position. It has no effect on
the maximum servo travel.
This function reverses the rotation
direction of the channel-4 servo.
When the trim position deviates from the
center, the deviation will be on the opposite
side when the servo is reversed.
*CH4 can't be used in R203GF.
Steering EXP

EXP-CH1

   
Around the neutral
position is mild.
   
Around the neutral
position is quick.
Range: -100% ～ +100%
EXP rate change
+ and - Press and hold
Reset
Steering EXP
Racers Tip
When the setting is not determined, or the characteristics of the model are unknown, start
with 0%. (When EXP is set to 0%, servo movement is linear.)
This function changes the sensitivity of
the throttle servo in the throttle trigger
forward side and brake side directions.
It has no effect on the servo maximum
travel.
Throttle EXP

EXP-CH2

Racers Tip
When the track conditions are good and there is no sense of torque at the power unit, set the
EXP to the + (quick) side. When the track is slippery and the drive wheels lose their grip,
set the EXP to the - (mild) side.
Forward
Brake
Range: -100% ～ +100%
EXP rate change
+ and - Press and hold
Reset
Range: -100% ～ +100%
EXP rate change
+ and - Press and hold
Reset
Throttle EXP
(Forward side)
(Brake side)
Adjust the EXP
while operating
the throttle trigger
each way.
ForwardBack
Brake
Trigger
Servo
＋side
Quick
＋side
Quick
－side
Mild
－side
Mild
(This setting screen is displayed when 4WS mixing or Brake mixing is activated.)