shows in the box.
___ Press SET (Q).
___ Copy to a new condition. (Select the blank condition for 2nd condition. To find a
blank one, press the LiST key (.R). The first 10 listed are your base models (your 10
model memory) and cannot be used as conditions. Press NeXT (P) and find the first
condition which has its # in its name and 00 in its model #. Lets assume #15 is blank
on your radio and we're going to select #15. Press END (N) and enter #15 into the
TO CONDITION box.
___ Press END (N).
8,(G'
HOW? From the home screen:
___ Press model menu (P)
___ Press Condition SeLect CSL (B F).
___ Choose the 2nd condition for this primary model (or 3rd or 4th if you're making
additional conditions past the first one) by pressing B and then selecting the
condition # you are using. In our case, its # 15 so we're going to use the F key 4
times to go up from 11 to 15.
___ Now, WAIT! don't end yet! You have to set a switch to use the condition, so do that
now. Press SWiTch (P)
___ Choose a switch to go from your base condition to this condition. For our example,
lets use switch C (.C). Now the switch is currently off in all 3 positions as you can
see, lets decide to use the 2 position of the switch (pulled down toward the sticks) by
pressing the P key to make the condition active when the switch is in the #2 position.
Press PRE to go back.
___ Now SET the model (.O)
___ Press END.
>,< 1
//(!.-+HH@I
@@@,9<IBF
'I%%&&$J#ED'
E+"''
'<(,(
'IBD()D(#/
'"'+*',
To Next Page
Loading...
