FUTABA FX-20 - Battery Charging Procedure; Ni-MH Battery Charging Steps

FX-20-2.4G
Futaba Corporation
5
Fig. Bottom view
Fig. Inside view (Battery box)
2.
2.2.
2.Charging the battery
Charging the batteryCharging the battery
Charging the battery
1-1. Please confirms the power switch is off.
1-2. Insert the plug of the charger to charging bush of transmitter.
1-3. During the charging, the LED of the charger is on.
The charging time is appx. 15 hours. Please do not charge the battery for 15hours or more.
The overcharge damages the battery.
The battery is 6 cells Ni-MH battery the capacity is 7.2 V/ 1,700mAH.
Slider
Ni
-
MH battery