FUTABA FX-20 User Manual

FX-20-2.4G
Futaba Corporation
6
３．
３．３．
３．Operation of the touch sensor
Operation of the touch sensorOperation of the touch sensor
Operation of the touch sensor
Contents Operation
Touch
part
Condition Working
At the screen have some pages.
(Ex. P-MIX screen)
The cursor jumps to top of next
page
S1
At the screen have Only one(１)
page.
The cursor jumps the top of page.
At the input data mode with
blinking the setting data.
The setting data is canceled.
At the moving cursor mode. Change to the input data mode.
At the input data mode. Change to the moving cursor mode.
Short touch
RTN
At the input data mode with
blinking the setting data.
The data is entered.
Home screen,
System menu,
Linkage Menu,
Model menu,
Selecting ON/OFF Switch,
USER NAME,
MODEL NAME,
DISPLAY, INFO,
MODEL SELECT,
MODEL TYPE,
FREQUECY,
DATA RESET,
TIMER,
Selecting Control,
Selecting Function,
SERVO MONITOR
Jump to “System Menu” screen
directly.
SYS
Except of above Jump to “SERVO MONITOR”
screen directly.
LNK At all screens Jump to “Linkage Menu” screen
directly.
MDL At all screens Jump to “Model Menu” screen
directly.
HOME screen Key lock On or Off S1
Except the HOME screen Jump to HOME screen directly.
RTN At the input data mode with
blinking the setting data.
Entered decision.
Long touch（1 second）
At the input data mode without
blinking the setting data.
Reset to the initialized value.
Scrolling Outline At the moving cursor mode The cursor is moved.

FUTABA FX-20 Specifications

General

Brand	FUTABA
Model	FX-20
Category	Remote Control
Language	English