FUTABA Sky Leaf Samba f User Manual

18
ŶƈƗŃƗƋƈŃŦƒƑƗƕƒƏŃŷƋƕƒƚƖ
13
Toensureasuccessfulflight,flyyourskyleafsetuponlyaccordingtotheC.G.inthismanual.Thisprovides
youwiththebestchanceforsuccessandenjoyablefirstflightsthatshouldbesurprise-free.Amodelthat
isnotproperlysetupmaybeunstableandpossiblyunflyable.
● Usearuler,aninclinometer,ora
protractortoaccuratelymeasure
andsetthecontrolthrowofeach
controlsurfaceinleft/rightorup/
downsamethrow.
Dothefirstflightinlowrate.
■
HighRatesareaggressive,soeaseintousinglowratesforgeneralflying.
● Makesurethattheoverloadwon'tbeaddedtoeachservoatthetimeofmaxoperation.Incaseof
anoverload,reducethetraveladjustmentintheTX.
SkyLeafTip
It is best to utilize the dual rate function of the transmitter for the best
control. A flight is usually done in low rate. For 3D Flight, it is best
to use high rates. When using high rates, use (-) EXPO. That will help
control the model more smoothly around neutral stick position's.
Ṽ
Low Rate:
ẅί
D/R
ὸ
Aileron : 40% Elevator : 50% Rudder : 100%
ẅẅẅẅẅẅẅẅẅẅ ί
EXPO
ὸ
Aileron : -45% Elevator : -20% Rudder : -30%
Ṽ
High Rate:
ẅί
D/R
ὸ
Aileron : 120% Elevator : 130% Rudder : 120%
ẅẅẅẅẅẅẅẅẅẅ ί
EXPO
ὸ
Aileron : -90% Elevator : -80% Rudder : -40%

FUTABA Sky Leaf Samba f Specifications

General

Brand	FUTABA
Model	Sky Leaf Samba f
Category	Toy
Language	English