FUTABA T6K Software Update Manual

1M23Z05202
T6K Software update manual
Required for update (Purchase separately)
Preparations
- 1 -
CIU-3 or CIU-2
(optional)
PC
(Access is possible by the web)
CGY750/GY701/GY520
Extensions (optional)
DSC cord
(for updates of 4PV optional)
or
USB Port
1.
Install the driver for the CIU-3/CIU-2 onto your PC.
When the CIU-3 is first connected to the PC, once the CIU-3 is connected to the PC, download the
recommended driver software Using Windows Vista, the "Found New Hardware Wizard" window
appears on the screen. Click "Locate and install driver software".
When the CIU-2 is rst connected to the PC; the “Found New Hardware Wizard” window appears on the
screen. Install the drivers download from local Futaba Dealers Website.
Refer to the manual of the CIU-3/CIU-2 for further information.
CIU-3 or CIU-2
*The display screen is an example. The screen depends on the PC. T6K screens are subject to change without notice.
Your Futaba T6K transmitter programming can be updated easily online. When functions are added or improved, the
update le can be downloaded from our website.
For more information, check out web site for FAQ regarding updating this product.

FUTABA T6K Specifications

General

Modulation	FHSS
Proper use	Airplane, Glider, Helicopter
Product type	Remote control
Certification	CE
Compatibility	Futaba R3006SB Mode 2 (FUTK6110)
Product color	Black
Channels quantity	6 channels
Brand compatibility	Any brand
Supported protocols	S-FHSS / T-FHSS
Number of memory records	30
User name number of characters	8
Battery type	AA
Number of batteries supported	4
Not for children 0-3 years	Yes
Display type	LCD
Display resolution	128 x 64 pixels