Water Bee™ Pedal Boat Owner’s Manual and Assembly Guide
III. Assembly Instructions
A) Paddle Wheel Blade Installation
(Note: for purposes of clarity only, the paddle blade installation (photos 2-5) is
shown without boat)
1. Your paddle hub comes
already installed in your
Water Bee pedal boat. To
access the paddle hub,
simply turn the boat on its
side, or raise the boat onto
a table.
2. Locate open slot on
addle hub and align
base of paddle blade as
shown.
3. Push paddle blade
firmly into open slot.
5. Ensuring all paddle blades are installed in
the same direction (think of a swimmer
cupping the water), repeat procedure with
other paddle blades.
4. Ensure proper
installation of the paddle
lade: listen for the paddle
blade to snap into the
addle hub.
Incorrect paddle blade
installation
Correct paddle blade installation
Future Beach
™ Corporation
The World’s Beach Company
™
4
To Next Page
Loading...
