Original Bedienungsanleitung FX-4MS142_de_en_fr_ita_rev01
39
A metal sheet with 3 teeth is equipped with the machine.
The metal blade is used for cutting bushes and weeds up to 3/4" in diameter. The use of the
saw blade with this machine is prohibited.
WARNING DANGER
Additionally, wear head, eye, face, and hearing protection and shoes
against smooth surfaces. Do not wear bars, jewelry, or
loose, dangling clothes that could get caught in the machine.
Do not wear footwear with unprotected toes and do
not work barefoot or without leg protection. In certain situations,
you must wear head protection.
WARNING DANGER
Do not cut with blunt, cracked or damaged metal sheets.
Before working, check the surface for obstacles such as stones, metal bars or
other objects. If they cannot be removed,
mark this position to avoid collision with
the sheet. Lines can become entangled on the blade head and flap or be whirled
into the air.
WARNING DANGER
Do not use the motor scythe to cut out trees.
WARNING DANGER
Always use the shoulder strap. Adjust and fix the belt and
belt clamping plate on the machine so that the machine hangs a few cm above
the floor.
The cut-out head and the protective shield should be aligned horizontally
in all directions. Pre-tension the machines on the right side of your
body.
To Next Page
Loading...
