FUXTEC FX-BV140 - Page 11

Original User Manual FUXTEC FX-BV140 rev03
11
4. ASSEMBLY
4.1 CLIP HANDLE
1. Fasten the lower handlebar in the body of the machine using bolts, washers, and locking attachments.
(Fig.2A/ Fig.2B/ Fig.2C)
2. Connect the lower handlebar and the upper handlebar with screws, washers, and locking attachments.
(Fig.2D/ Fig.2E/ Fig.2F)
3. Attach the cable clamps at the marked position and then fasten the cable. (Fig.2G)
Fig.2A Fig.2B Fig.2C
Fig.2D Fig.2E Fig.2F
Fig.2G
Screw Washer
Locking
attachment
Screw
Washer
Closure-
attachment
Cable Clamp