EasyManua.ls Logo

FUXTEC FX-LB126 - User Manual

FUXTEC FX-LB126
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Original User Manual FUXTEC petrol leaf vacuum cleaner / blower FX-LBS126 / FX-LB126_rev05
1

Table of Contents

Questions and Answers

  • T
    Tammy MartinAug 8, 2025
    Why FUXTEC Blower engine does not start?
    • T
      Timothy CochranAug 8, 2025
      The FUXTEC Blower engine might not start due to several reasons: the tank is empty, the engine is flooded, the spark plug is dirty, the carburetor nozzles are dirty, the spark plug connection is damaged, or there's no ignition spark. Here's how to solve it: * Fill the tank with petrol. * Remove gas, start several times, clean and dry the spark plug. * Clean the spark plug, check its heat value, replace if necessary, or adjust the electrode gap to 0.6mm – 0.7mm. * Clean the carburetor. * Renew the spark plug connection. * Check the on/off switch, cables, and ignition module; replace the ignition module if needed.
  • M
    Miss Vanessa SandovalAug 25, 2025
    What to do if FUXTEC Blower engine does not give maximum power?
    • T
      Tracy FinleyAug 25, 2025
      If your FUXTEC Blower engine isn't delivering maximum power, it could be due to a dirty spark plug, dirty carburetor nozzles, a dirty air filter, a dirty exhaust, or a leaking seal in the crankcase. Here's how to address these issues: 1. Clean the spark plug, check its heat value, and replace it if necessary, or adjust the electrode gap to 0.6mm – 0.7mm. 2. Clean the carburetor. 3. Clean the air filter. 4. Dismantle and clean the exhaust pipe. 5. Renew the seal in the crankcase.

FUXTEC FX-LB126 Specifications

General IconGeneral
Engine Type2-stroke
Displacement25.4 cm³
Weight4.5 kg
Fuel Tank Capacity0.5 L
Power0.75 kW

Related product manuals