Original Bedienungsanleitung FUXTEC FX-MS152 / FX-MS162_de_en_fr_ita_rev16
40
severe enough that the operator loses control of the device. A cutter blade kick-
back can occur without warning if the cutter blade encounters an obstacle that
becomes blocked or jams. This is more likely in areas where it is difficult to see
the material being cut. For easy and safe cutting, approach the weeds to be cut
from your right to your left side. If an object or stick of wood is hit unexpectedly,
this can reduce a cutter blade kick-back.
25. Notes on working with the metal blade
A metal blade with 3 teeth is delivered with the device. It is used for cutting bushes and
weeds. The use of a saw blade with this device is prohibited.
WARNING DANGER
Do not cut with blunt, cracked or damaged metal sheets.
Before working, check the surface for obstacles such as stones, metal bars or
other objects. If they cannot be removed,
mark this position to avoid collision with the
blade. Lines can become entangled on the blade head and flap or be swirled in the
air.
WARNING DANGER
Do not use the motor scythe for cutting out trees.
WARNING DANGER
Always use the shoulder strap. Adjust and fix the belt and belt clamping plate on
the device so that the device hangs a few cm above
the ground. The cut-out head and the protective shield should be aligned
horizontally in all directions. Pre-tension the devices on the right side of your body.
To Next Page
Loading...
