FUXTEC FX-MSP2.2 User Manual

Original User Manual FUXTEC FX-MSP2.2
9
3. Anti- Electrostatic Installation
Dusting or spreading of the chemical granules can generate electrostatic charges.
This is proven after the application of such chemicals under certain conditions of
air temperature and humidity.
Please use the enclosed safety chain (C) to avoid electrostatic charges and mount
the cable lug (A) on the pull starter. Please loosen one screw of the starter and
push the cable lug (A) underneath. Then retighten the screw of the starter. When
the air becomes humid, the electrostatic charge is high, especially if the tube's
skin used to spray and distribute the granules is damp. Electrostatics often occur.
Please pay attention to this.
Fig. 7
The safety chain C should be freely suspended and touch the ground for grounding
during work.
At the same time, please install the ground cable (B) under the hose clamp, as
shown in Fig. 7.

FUXTEC FX-MSP2.2 Specifications

General

Brand	FUXTEC
Model	FX-MSP2.2
Category	Paint Sprayer
Language	English