Original Bedienungsanleitung FUXTEC FX-MT152/-MT152E/-MT252_de_en_fr_ita_rev18
79
Checking the chain tension
• Check the chain tension.
• Switch off the engine.
• Wear work gloves to protect your hands.
• The chain must lie close to the bottom of the bar, and at the same time, it must
be possible to move the chain along the bar with your hand.
• Retighten the chain if necessary.
Lubricating the saw chain
For automatic and reliable lubrication of the chain and guide bar, please use only high-
quality and environmentally friendly lubricating oil with an adhesive additive.
The maintenance requirement depends on lubricating oil quality. It is, therefore,
essential to use only designated chain lubricating oil.
Top up 20 grams of grease/lubricant every 25 operating hours.
If no chain lubricating oil is available, you can use an HD single-grade or multi-grade
engine oil with a viscosity appropriate to the outside temperature in an emergency.
Do not use used oil!
Medical studies have shown that contact with used oil can lead to skin cancer.
Furthermore, waste oil is harmful to the environment!
Used oil no longer has the necessary lubricating properties and is unsuitable for
lubricating the chain.
Filling oil for the chain
To Next Page
Loading...
