Section 50 00-02-1031
2019-08-07 - 10 -
Password
Passwords and Screen Access
Some settings are password protected, including the setup screens.
There are two separate levels of passwords to accommodate several security needs:
Standard password – Allows access to some features except the super user menu and setup editing.
Super User password – Adds the super user menu and setup editing to the standard menus.
Where to Log ON and OFF
The password screen is displayed whenever security access is required for an action, and you may log in from
there. Default passwords are 164 for operator or 133 for super.
1. To access the password screen anytime, from the Home Screen / Landing Page, press the Setup / Enter
key to open the Password screen. The edit curser rest on the far right digit. Example 00000.
2. Press the Up / Down arrows to add a number value.
3. Press the Left / Right arrow to move the edit cursor to the next digit and so on.
4. Press Setup / Enter to save, once all numbers are placed. Example 00164.
NOTE: After three minutes without activity, the keypad returns to the default operational
screen, and a password must be re-entered to return to the setup and edit menus.
Once you have entered with the default password, we recommend you change passwords for better security. See
the explanation on the Super User Menu page.
To Next Page
Loading...
General