FW Murphy Centurion C5 M-VIEW MV-5-C User Manual

Section 50 00-02-1031
2019-08-07 - 11 -
Before Starting the Equipment for the First Time
Setup – MV-5-C Display
Read and follow steps in the order listed.
1. Locate the system drawing inside the panel and verify its drawing number matches the sticker on the
lower front panel.
2. Locate the legend of the drawing and find the configuration description. Record this description.
3. Power up the Centurion System.
a. Allow time for the display to boot up and land on the Home Screen / Landing Page, approximately
15 seconds.
b. From the Centurion Home Screen / Landing Page, touch the Arrow key to scroll left until you find
the screen FW Murphy – MVIEW screen.
c. Verify that the configuration description matches the one you previously recorded from the
drawing legend.

FW Murphy Centurion C5 M-VIEW MV-5-C Specifications

General

Brand	FW Murphy
Model	Centurion C5 M-VIEW MV-5-C
Category	Monitor
Language	English