Fyne Audio F1 Series User Manual

5
2 TECHNOLOGY
Our experienced team of acoustic and
product design engineers have been in the
loudspeaker industry for very many years.

they have been augmenting their existing
skills and developing new technologies
to ensure that we can offer best in class
performance through technical innovation
and advanced manufacturing techniques.


source system whereby the bass / midrange
driver shares a common centre with the
high frequency unit. Providing outstanding

is radiated isotropically with constant

cone. Sound is produced emanating from a
single point.

every aspect of these meticulous designs
has been considered. Eliminating unwanted
vibrations which would be detrimental

source drivers are built around a custom
tooled rigid cast aluminium chassis.


well below the crossover region. Pushing
the break up mode well above the level

titanium alloy high frequency diaphragm


copper shorting ring provides low distortion.
The unique geometry of the high frequency





terminate energy. Such a large diaphragm
allows a very low crossover frequency of

much of the vocal range is handled by the
tweeter.





of tweeter.

computer optimised expansion rate and



compression.




sounding midrange and clean transient


with rectangular copper voice coil on an

A copper shorting ring on the pole piece

distortion tenfold.





Fyne Audio F1 Series Specifications

General

Series	F1 Series
Nominal Impedance	8 Ohms
Woofer	Multi-fibre cone
Cabinet	Birch
Finish Options	Piano Black, Walnut