Need help?Do you have a question about the Fyne Audio F302 and is the answer not in the manual?
Handle sharp spikes with care and always connect speakers to a suitable amplifier, not mains supply.
Assemble plinths and spikes securely, protecting the cabinet. Adjust spikes for stability and use floor protection cups.
The F300 offers wall mounting with a rear hanging point. Ensure appropriate fixing hardware is used.
This model uses a template for wall mounting. Ensure appropriate fixing hardware is used.
Position speakers 1.5-4.5m apart, min 0.5m from rear wall and 1m from side walls for optimal stereo imaging.
Shelf mounting is possible, but stands positioning the tweeter at ear level yield better results.
Front speakers for AV should be equidistant, ideally at ear level. Refer to subwoofer instructions for integration.
Use suitable cables and connect positive to positive, negative to negative. Bare wire or 4mm plugs are options.
F303 models have HF/LF terminals. Use link bars for single-wiring or remove for bi-wiring.
Remove grilles for best sound. Clean cabinets with a microfiber cloth, avoiding solvents and direct sunlight.
Register products online. Passive speakers have a 7-year warranty; active components have a 2-year warranty.
Detailed specifications for F300, F301, F302, F303, F300C, and F300LCR models are provided.
General| Brand | Fyne Audio |
|---|---|
| Model | F302 |
| Category | Speakers |
| Language | English |
To Next Page
