Need help?Do you have a question about the Fyne Audio F502SP and is the answer not in the manual?
General| Frequency Response | 30Hz - 34kHz |
|---|---|
| Nominal Impedance | 8 Ohms |
| Crossover Frequency | 250Hz & 1.7kHz |
| Type | Floorstanding |
| Recommended Amplifier Power | 30 - 200W |
| Weight (each) | 30.2kg (66.6lbs) |
| Finish | Black Oak |
| Sensitivity | 92dB (2.83V @ 1m) |
| Drive Unit Complement | 1 x 200mm IsoFlare™ point source driver, multi-fibre bass / midrange cone, with FyneFlute™ surround, 25mm magnesium dome tweeter. 1 x 200mm multi-fibre bass cone. |
To Next Page
