9
4.5 Receiver:
1. connect the receiver with the telephone by at-
taching one side of the spiral cable to the bot-
tom of the receiver and the other side to the left
side of the telephone
2. push in the plugs until they’re securely connected
4.6 ‘Vibrat.’ connection:
The bottom of the phone is provided with a ‘Vibrat.’
input for connecting a shaker that starts vibrating
when receiving incoming calls. This shaker is not
included, but can be obtained from the Fysic ser-
vice department. See page 4 of this user’s manual
for address information.
To Next Page
Loading...
