EasyManua.ls Logo

Fzone FZ-ATO - Troubleshooting Alarm Situations

Fzone FZ-ATO
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If the buzzer alarm turn off, there is only LOW, MID, HIG lights flash, no
buzzer alarm.
The reasons of failure will be the following situations:
Failure
Situation
Reasons
Pumping
failure
Long beep
ATO light flashes slowly
PAUSE light flashes quickly
The water pump is broken.
The water level drops too much
artificially, and the two SPT pumping
time still cannot reach the LOW level.
The water pipe is bent and cannot
pump the fish tank with water.
Sensor
failure
Buzzer alarm rings every 0.5second
The HIG light flashes every 0.5second
LOW light does not turn on
The sensor in the tank is dirty,
blocked by debris of plants, mud or
other stuff.
The water surface or tank wall is
dirty.
Device
failure
Long beep for three seconds, beep
twice
Controller need be restarted or
exchanged
Chapter VII: Alarm Situations
11