PERFORMING BLOOD PRESSURE MEASUREMENT
1. Press key to turn on the device.
2. The cuff deflates to remove residue air before starting
measurement. Releasing air indicator blinks on the display.
3. Memory record number appears on the display.
4. The cuff starts to inflate. It is normal for the cuff to feel tight.
If you want to stop cuff inflation, press key to turn off the
device and the cuff will deflate.
5. The device is measuring the blood pressure and pulse rate while
the cuff is inflating. Pressurize indicator, the corresponding
pressure bar indicators and the current cuff pressure appear on
the display. As soon as a pulse is detected, the Heart Mark
flashes at every heartbeat.
6. When the measurement is completed, the systolic pressure, the
diastolic pressure and pulse rate are displayed and are stored to
memory. The cuff deflates automatically.
7. Press key to turn off the device.
The device will automatically turn off after 1 minute of
inactivity.
- 11 -
Deflation before
measurement
Display Memory
Record Number
Inflation and Measurement
in Progress
Inflation and Measurement
in Progress
Measurement completed,
Display with data
To Next Page
Loading...
