7
For viewing channels 1,2,3 and 4, use 1,2,3 and 4 on numeric keypad
respectively.
【＋】
【＋】【＋】
【＋】
,
【－】
【－】【－】
【－】
keys
：
：：
：
During setup, plus and minus are used to select next or previous values.
▲
，
：
：：
：
Up, Down directional keys: Move selection up and down in setup menu.
，
：
：：
：
Left, Right directional keys: Move cusor left or right in setup menu.
【
【【
【
Enter
】
】】
】
key: During setup, select and save entry
During Playback and preview, displays the channel name, text number,
driver name, event sensor item and time, year/month/date, time, GPRS/GPS
info. on the screen.
【
【【
【
PLAY
】：
】：】：
】：
Starts/Resumes playback from any other mode (FF, RR, Frame by Frame etc)
【
【【
【
SLOW
】：
】：】：
】：
Reduces playback speed to 1/2X
、
1/4X
、
1/8X
、
1/16X mode. Press PLAY to
return to normal playback speed.
【
【【
【
PAUSE/STEP
】：
】：】：
】：
Freezes playback to single frame and can advance one frame at a time.
To advance the frame press Pause/Step to move frame by frame.
Press EXIT to return to normal playback speed.
【
【【
【
FWD
】
】】
】
: Fast forward the video while playback.X1, X2, X3, X4 modes available.
PressFWD to switch, press
【
PLAY
】
to return to normal speed
；
【
【【
【
REV
】
】】
】
: Reverse the video while playback, 1X,2X,3X,4X four modes are available. Press
REW to switch, press
【
PLAY
】
to return to normal speed
；
【
【【
【
POWER ON
】
】】
】
: Reset the MDVR to Power on and Power off mode. (standby and start up)
；
【
【【
【
LOGIN/LOCK
】
】】
】
: If the security is enabled in the setup, use LOGIN/LOCK key to enter the
user setup. It is important to remember the password due to without
restoration function. Log in
（
to enter into “User ID select” and “Password”
input interface
）
and lock functions
（
To exit setup and operation
）
【
【【
【
EXIT
】
】】
】
: Exit to the preview or return to the last menu
；
【
【【
【
RECORD
】：
】：】：
】：
Start manual record
【
【【
【
STOP
】：
】：】：
】：
Stop manual record
【
【【
【
SETUP
】：
】：】：
】：
Enter into setup interface and setup the system parameters
【
【【
【
PTZ
】：
】：】：
】：
PTZ control
，
press this key to enter into PTZ control interface when at single live
view
；
【
ASISTANT
】
for future use
2.1.2 Mouse Operation
You can use mouse to make operation of the menu except IR remote controller. (The operation
To Next Page
Loading...
