®
Disconnect the Drive
A great feature of G-DRIVE is its ability to be connected and disconnected while your
computer is running. To prevent failures and/or data loss, it is important to follow the
steps below when disconnecting or ‘unmounting’ the drive from your computer.
1. Before powering down and disconnecting the G-DRIVE, unmount the drive
by simply dragging the G-DRIVE icon to the trash located in the dock.
Keyboard shortcut: Select the drive icon and hit Command+E.
2. It is safe to remove the drive from your system when the drive icon is no longer
present on your desktop.
Helpful links
• To use G-DRIVE on Windows, go to Windows Use.
• To use G-DRIVE on Mac and Windows together, go to Cross Platform Use.
To Next Page
Loading...
