Nr. Name Function
1. POWER On/Off the power supply
2. NUMBERS Number buttons
3. P.MODE Set up pictures
4. S.MODE Set up sound mode
5. MENU Main menu
6. NAVIGATION Navigation buttons + OK/ENTER
7. EXIT Exit
8. VOLUME +/- Volume Up/down
9. MTS Multi Track Sound button
10. RED Red button for TELETEXT
11. GREEN Green button for TELETEXT
12. REWAND Backward / TELETEXT menu
13. FORWARD Forward
14. PAUSE Pause stop
15. STOP Stop
16. DTV/RADIO DTV/RADIO swich / Repeat
17. RECORD Record digital service
18. LIST Channel list
19. REC.MENU Recorded files menu / PRV menu
20. DTV/ATV Digitális/ Analog TV swich
21. ASPECT Display aspect ratio
22. SOURCE Swich the input source
23. INFO Display the info of the current place
24. MUTE Mute the sound
25. PAGE UP/DOWN Channel up / down
26. SLEEP On/off the power supply within / 0…240min
27. BLUE Blue button for TELETEXT
28. YELLOW Yellow button for TELETEXT
29. NEXT/ Next / TELETEXT color activator
30. BACK/ Back / TXT/TELETEXT-TV mix
Changing the batteries in the remote control
1. Remove the cover.
2. Insert 2 AAA 1.5V batteries.
Observe the polarity.
The mark found on the battery compartment.
3. Replace the cover.
In the case of low battery power may occur. The device will
not work properly.
Recommendation: use Alkaline batteries.
If the remote control is not used for a long period of time,
remove the batteries.
* Change the remote controller's batteries for equivalent ones.
Do not mix different types, do not mix old and new, do not burn
them (danger of explosion).
The remote control only works when the TV and
electrical power to the unit is turned on.
Locate the power button on the bottom.
Then press the POWER button on the remote
control.
Battery is not included in the pack.
Note:
Do not drop the remote control.
Keep in a dry place.
If you do not operate, replace the batteries.
To Next Page
Loading...