Why my Gabarron HHR Heater does not reach set temperature?
If your Gabarron HHR Heater doesn't reach the set temperature, ensure an adequate temperature is selected. Check for obstructions like shelves above or objects in front of the heater that could affect its output. Also, verify that the heater is appropriately sized for the room.
What to do if ERR4 is displayed on my Gabarron ECOHHR20?
ERR4 indicates an issue with the economy off-peak charge times or the absence of an off-peak supply to the Gabarron Heater, but it won't stop the heater from working normally. Ensure the isolator switches are on, no breakers/fuses are tripped, there is an off-peak supply, and the off-peak timings match the heater. Also, check if the safety cut-out has tripped.
How to unlock the keyboard on my Gabarron Heater?
If the display shows [- -] when pressing a key on your Gabarron Heater, the child lock is likely activated. To unlock it, press the + and - buttons simultaneously for about three seconds, or until [- -] disappears from the display.
Explains power switch function and the need for dual electrical supplies (economy and 24hr).
Details the keypad layout and basic functions of the four control buttons.
Provides step-by-step instructions for checking and adjusting the heater's Day and Time settings.
Guides users on how to adjust the desired comfort temperature setting using the control panel.
Explains the process for adjusting the economy temperature setting on the heater.
Details how to change the default weekly program for comfort and economy temperature settings.
Explains the procedure for copying programmed settings from one day to another.
Describes how to temporarily override the current program to maintain comfort temperature.
Explains how to lock and unlock the control panel to prevent unauthorized changes.
Details how to check heater status like room temp, core temp, air temp, and charge percentage.
Provides instructions on how to safely clean the storage heater.
To Next Page
General
