What to do if the Gabarron ECOSSH158 keyboard does not respond?
If the thermal radiator keyboard is locked, the display will show the “Lock” message. To unlock it, hold the “+” and “-” buttons simultaneously for 3 seconds.
How to troubleshoot a Gabarron ECOSSH158 ECOMBI SSH that does not heat?
First, ensure the Gabarron ECOMBI SSH heater is properly connected and switched on. Check that the device isn't covered and that the lower air inlets are free from obstructions. If the LR safety limit has been activated, it may need to be manually reset. If problems persist, contact a technician.
Why does my Gabarron ECOSSH158 ECOMBI not reach the set temperature?
Ensure that you have selected an adequate temperature setting. Also, verify that the heater's size is appropriate for the heat loss in the room.
What to do if Gabarron ECOSSH158 Heater SSH does not communicate with the G Control Hub?
Check that the unit is associated; the corresponding symbol must be visible on the LCD. For distances exceeding 30 meters or when there are 2-3 walls, associate the closest units first, as each unit can function as a signal extender. If the symbol is flashing, verify the G Control Hub's connection to the network and check if any other device in the RF Net, potentially acting as a signal extender, has been removed.
To Next Page
General
