Gaggenau RF463306 - Ice and Water Dispenser Light; Ice and Water Dispenser Proximity Sensor; Setting the Temperature Unit; Setting the Language

18
en Operating the appliance
Ice and water dispenser light
Use this function to set how long the light will illuminate
the ice and water dispenser.
Setting ice and water dispenser light
1 Press à button to open the main menu.
2 Press B button to move to the menu item Basic
settings.
3 Press ™ button to open the menu item.
4 Use C button to move to the menu item Ice and
water dispenser light.
5 Press % button to open the menu item.
6 Press C button to select the required duration.
7 Press ™ button.
The setting is saved.
8 Press ' button to exit the menu.
Ice and water dispenser proximity
sensor
When the proximity sensor is switched on, the ice and
water dispenser light switches on automatically as soon
as a glass is held underneath.
Switching proximity sensor on or off
1 Press à button to open the main menu.
2 Press B button to move to the menu item Basic
settings.
3 Press ™ button to open the menu item.
4 Press C button to move to the menu item Motion
sensor.
5 Press % button to open the menu item.
6 Press B C buttons to move to the required setting.
7 Press ™ button.
The setting is saved.
8 Press ' button to exit the menu.
Setting the temperature unit
You can choose between the unit °C and °F.
1 Press à button to open the main menu.
2 Press B button to move to the menu item Basic
settings.
3 Press ™ button.
4 Press B button to move to the menu
item Temperature unit.
5 Press % button.
6 Press B C buttons to move to the required unit.
7 Press ™ button.
The unit will be changed.
8 Press ' button to exit the menu.
Setting the language
1 Press à button to open the main menu.
2 Press B button to move to the menu item Basic
settings.
3 Press ™ button.
4 Press B button to move to the menu item
Language.
5 Press % button.
6 Press B C buttons to move to the required
language.
7 Press ™ button.
The display restarts, and the start screen is
displayed.
Resetting to factory settings
1 Press à button to open the main menu.
2 Press B button to move to the menu item Basic
settings.
3 Press ™ button.
4 Press B button to move to the menu item Factory
settings.
5 Press % button.
A signal tone sounds and a message to confirm
reset appears.
6 Press ™ button.
All settings are reset to the factory settings.
7 Press ' button to exit the menu.
Switching demo mode on or off
The cooling function of the appliance is switched off. All
other functions can be used.
Note:
Do not store any food in demo mode as the appliance
remains at room temperature.
1 Press à button to open the main menu.
2 Press B button to move to the menu item Basic
settings.
3 Press ™ button.
4 Press B button to move to the menu item Demo
mode.
5 Press % button.
6 Press B C buttons to select the setting On or Off.
7 Press ™ button.
The setting is saved.
8 Press ' button to exit the menu.