28
en Cleaning
Cleaning the equipment
To clean, take the variable parts out of the appliance.
~ "Features" on page 12
Ice cube container
Caution!
– A full ice cube container is heavy:
Pull the container out with both hands.
– Risk of cold burns:
Avoid prolonged contact of the skin with frozen
food, ice and metal surfaces in the freezer
compartment.
To ensure you always have fresh ice cubes and to
prevent old ones from sticking together, remove them
and clean the ice cube container regularly.
1 Lift the ice cube container.
2 Slowly pull out the ice cube container.
3 Empty and clean the ice cube container with
lukewarm water.
4 Dry off the inside of the ice cube container well so
new ice cubes do not freeze and stick to it.
5 Insert the ice cube container until it engages.
Note: If the ice cube container cannot be inserted,
rotate the conveyor and try again.
Drip tray
You can remove the drip tray to clean.
1 Remove the drip grate.
2 Remove the drip tray.
3 Empty and clean the drip tray with lukewarm water.
4 Re-insert the drip tray and the drip grate.
To Next Page
Loading...
