Why does water end up in the drip tray of Gaggia BESANA Coffee Maker?
It's normal for water to end up in the drip tray of your Gaggia Coffee Maker. The machine uses water to rinse the internal circuit and brewing unit to guarantee the perfect cup of coffee. Some of this water flows directly into the drip tray. Empty the drip tray regularly.
What to do if my Gaggia BESANA Coffee Maker is stuck in descaling?
If your Gaggia Coffee Maker is stuck in the descaling procedure, press the on/off button. You can then restart the descaling procedure or follow the instructions in chapter ‘Descaling the machine’, section ‘If you are unable to finish the descaling procedure’.
What to do if Gaggia BESANA is stuck in descaling?
If your Gaggia Coffee Maker is stuck in the descaling procedure, press the on/off button. You can then restart the descaling procedure.
What to do if Gaggia Coffee Maker seems to be leaking?
The drip tray might be full and overflowed during brewing or descaling. Check if the water tank is leaking. Also, the brewing unit or the drains behind or under the brewing unit may be blocked. Rinse the brewing unit with lukewarm water and clean the upper filter carefully. Clean the inside of the machine with a soft, damp cloth.
What to do if Gaggia Coffee Maker does not work?
First, ensure the small plug is properly inserted into the socket, then plug in and switch on the machine. Also, verify that the voltage indicated on the machine matches your local mains voltage.
Why Gaggia BESANA does not heat up fast enough and little coffee comes out?
Descale the machine.
What to do if Gaggia Coffee Maker is leaking?
If your Gaggia Coffee Maker seems to be leaking, check the following: * Empty the drip tray, as it may be full and overflowed during brewing or descaling. * Inspect the water tank for any signs of leakage. * The brewing unit or the drains behind or under the brewing unit may be blocked. Rinse the brewing unit with lukewarm water and clean the upper filter carefully. Also clean the inside of the machine with a soft, damp cloth.
Why is there not enough coffee in my Gaggia BESANA Coffee Maker cup?
If there is not enough coffee in your cup when using the Gaggia Coffee Maker, it could be due to air in the internal circuit. Rinse the internal circuit by turning the control dial to the hot water icon and letting some hot water flow out.
How to fix too weak coffee from my Gaggia Coffee Maker?
If your Gaggia Coffee Maker is producing coffee that is too weak, adjust the ceramic coffee grinder to a finer setting. Brew a few cups of coffee to allow the machine to adjust to the new grinding settings, or try using a different type of coffee beans.
Why is my Gaggia BESANA not working?
If your Gaggia Coffee Maker is not working, ensure the small plug is inserted into the socket, then plug in and switch on the machine. Also, verify that the voltage indicated on the machine corresponds to your local mains voltage.
Overview of the descaling process and its duration.
Steps to prepare the machine for descaling.
General| Product type | Combi coffee maker |
|---|---|
| Water filter | Yes |
| Capacity in cups | 2 cups |
| Number of spouts | 2 |
| Coffee input type | Coffee beans, Ground coffee |
| Coffee maker type | Semi-auto |
| Appliance placement | Countertop |
| Water tank capacity | 1 L |
| Coffee beans capacity | 180 g |
| Maximum operating pressure | 15 bar |
| Number of grinder settings | 5 |
| Reservoir for brewed coffee | Cup |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 1 W |
| Control type | Buttons |
| Product color | Black |
| Built-in display | No |
| Housing material | Acrylonitrile butadiene styrene (ABS), Stainless steel |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 420 mm |
|---|---|
| Width | 295 mm |
| Height | 325 mm |
| Weight | 7000 g |
To Next Page