6
UNGUATOR
®
Mixing System
Please look over the operating instructions carefully
, in particular the notes on
safety, before operating the UNGUATOR
®
e/s. After a certain period of use, it may
make sense to study the operating instructions more closely for selected information.
Installation notes:
Select a suitable location for the UNGUATOR
®
e/s. CAUTION! The UNGUATOR
®
e/s
weighs almost 21 lbs.
Ensure that there is enough space to operate the UNGUATOR
®
e/s. This must include
sufficient space around the UNGUATOR
®
e/s to provide good ventilation.
Select a suitable environment:
•
Solid, level surface
•
Away from direct air flow from air conditioning systems, heaters, open windows
or fans
•
Removed from direct insolation, extreme humidity or temperature fluctuations
•
Clean, dry and dust-free
Remove all components from the cardboard box. Check to ensure that the following
components were included in shipment:
•
UNGUATOR
®
e/s
•
Operating instructions
Please contact customer service at SMS Elap GmbH & Co. KG. in the event that
components are missing or damaged. Contact information is at the end of these
operating instructions. Keep the cardboard box and the packing material in case you
have to send the UNGUATOR
®
e/s in for service.
You will find the power switch „O/I“ at the rear of the UNGUATOR
®
e/s on its base.
This is also the emergency switch. Please check now that the UNGUATOR
®
e/s power
switch is set to off. Connect the power cord to the socket outlet. You may now switch
the UNGUATOR
®
e/s on using the power switch. It is now ready for operation and
should show the default settings 2 minutes mixing time and speed step „5“ on the
display.
To Next Page
Loading...