Galactic Xtreme - Frame Assembly; Building the Legs

22 pages

To Next Page

To Previous Page

Optional Tools Not Provided:

13 mm wrench / socket

10 mm wrench / socket

16 mm wrench / socket

Mallet (not hammer, as it may damage/dent trampoline)

Step drill bit (or large drill to drill out larger hole if necessary)

Philips screw driver

Black Electrical Tape

Protective Eye Goggles

Gloves

Ratchet Tie Down Strap

Step 1 Setting Up The Frame

Building the Legs

Part # 1 and 2

10x17 will have 2

legs

Bolt together the

legs with Part 24

and 25