Galanz GLW57MS2B16 User Manual

MOVING THE WINE COOLER
MOVING THE WINE COOLER
10
NOTE:
Do not tilt the appliance over 45 degree when reversing
the door as possible damage to the sealed system may
occur.
1. Remove top hinge cover and 3 top hinge screws which are
below it. Then remove top hinge.
2. Remove 1 cabinet plug ,1 door plug and 2 door handle plugs.
3. Remove the door seal and 2 handle screws inside.Then
remove the handle.
4. Remove the door.
5. Remove the 2 baffle screws and then remove the baffle.
6. Remove the bottom hinge and 2 bottom hinge screws.
7. Install the bottom hinge on the other side with 2 bottom hinge
screws. Then install the baffle with 2 baffle screws.
8. Install the handle on the other side with 2 handle screws,and
then Install the door seal.
9. Install the door.
10.Install the top hinge on the other side with 3 top hinge screws.
11.Install top cover above the top hinge and install 1 cabinet
plugs on the other side.
TROUBLESHOOTING TIPS
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
WARNING

Galanz GLW57MS2B16 Specifications

General

Brand	Galanz
Model	GLW57MS2B16
Category	Kitchen Appliances
Language	English