Galanz P100D48AL-JC - Multi Stage Cooking; Light Control; Vent Fan Control

15
Use number pad choose cooking power level
Press Number pad Power level(Display) Press Number pad Power level(Display)
1、0
100%(PL10) 4 40%(PL-4)
9 90%(PL-9) 3 30%(PL-3)
8 80%(PL-8) 2 20%(PL-2)
7 70%(PL-7) 1 10%(PL-1)
6 60%(PL-6) 0 0%(PL-0)
5 50%(PL-5)
For example, suppose you want to cook at 80% power level for 10 minutes.
1. In standby mode, press
Time Cook pad once.
2. Use the number pads to enter cooking time.
3. Touch
Power Level pad once, and then use the number pad “8” to select 80% power level.
4. Touch
Start/Add 30Sec pad to confirm.
Multi stage cooking
For best results, some recipes call for different cook power during different stages of a cook cycle. You
can program your oven to switch from one power to another for up to 2 stages.
For example, suppose you want to set the following cooking program.
Microwave cooking
Microwave cooking
1. In waiting mode, input the first Microwave cooking. Do not touch
Start/Add 30Sec pad
2. Press
Time Cook pad once, and then input the second Microwave cooking.
3. Touch
Start/Add 30Sec to start.
Light Control
This feature is designed for the convenience of doing things outside the oven. To turn on the light at
the bottom of the oven, press
Light On/Off pad:
Press
Light On/Off button Working Mode
Once On
Twice Off
Vent Fan Control
Your oven can be used as a range hood. When it is turned on, the fan motor starts filtering out smoke,
odors, and grease generated from cooking.
NOTE: During cooking you can press Power level to check the power level, and you can adjust the
power level by pressing number pads when the display shows the power level.
NOTE: Auto menu, defrost and Kids meals cannot set in multi stage cooking program.