Dishwasher
Edition: 2015-06 Model: W45A1A401L
Page 9 / 27
If you take all these checks and the dishwasher still does not function or your
dishwasher have any other error display, you can power the dishwasher OFF, and
wait a few minutes. You can power the dishwasher on, try it again , if the
dishwasher still does not function and/or the problem persists, contact the
nearest authorised service center and provide them with the following
information:
--the nature of the problem.
--the model type number (Mod...) And the serial number (S/N...), which are
indicated on the plate located on the side of the inner part of the door.
Lower spray arm rotates with difficulty
--Spray arm is blocked by small items or food remains.
Lid in detergent compartment cannot be closed
--Detergent compartment has been overfilled.
--Mechanism is clogged with remnants of detergent.
Indicator lamps do not extinguish after washing has finished
--Main switch is still set to ON.
Remnants of detergent stuck inside dispenser
--Compartment was damp when it was filled up with detergent. Compartment
must be dry before detergent is added.
Water remains inside appliance after program has ended
--Blockage or kind in drainage hose.
--Pump is jammed.
--Filters are blocked.
--The program is still running. Wait for the program to end .
...during washing
Unusual amount of foam is creased
--Normal washing up liquid has been poured into the rinse-aid container.
--Remove any spilled rinse aid with a cloth as it could otherwise lead to excessive
foaming during the next washing cycle.
Appliance stops suddenly while washing is taking place
--Cut off electricity supply to appliance.
--Water supply has been interrupted.
Knocking sound can be heard while washing is taking place
A spray arm is knocking against the dishes inside the appliance.
To Next Page
Loading...
Need help?
General
