Dishwasher
Edition: 2012-02 Model: W60A1A401D、W60B1A401D
10
--Not enough detergent was added to dispenser.
--Detergent has insuffcient bleaching properties. Use a detergent containing a
chemical bleaching agent.
White stains are left on crockery, glasses have a milky appearance
--Not enough detergent was added to dispenser compartment.
--Amount of rinse-aid was set too low.
--Although water is quite hard, no salt has been put in appliance.
--Water softener was set too low.
--Lid on salt container is not screwed tight.
--If you used a phosphate-free detergent, try detergent containing phosphates
and compare results.
Dishes, cultlery, etc.have not been dried
--Selected programme did not include drying function.
--Amount of rinse-aid was set too low.
--Items were removed from dishwasher too soon.
Glasses have a dull appearance
--Amount of rinse-aid was set too low.
Tea stains or traces of lipstick have not been completely removed
--Detergent does not have a sufficient bleaching effect.
--Washing temperature was set too low.
Traces of rust on cutlery
--Cutlery is not sufficiently rustproof.
--Salt content in washing water is too high.
--- Lid on salt container is not screwed tight.
--- Too much salt was spilt while filling container.
Glasses become clouded and discoloured; coating cannot be wiped off
Unsuitable detergent was used.
Glasses are not dishwasher-proof.
Smears left behind on glasses and cutlery; glasses have acquired a metallic
appearance
Amount of rinse-aid set too high.
To Next Page
Loading...
