Galaxy 8 User Manual

Galaxy 8/18/60/500/512 3 User Guide
SETTING THE SYSTEM
BEFORE SETTING
Before setting the system ensure all doors and windows are secured
and areas protected by movement detectors are free from obstruction.
ENTERING A PIN - USER LEVEL 1-2
As each digit is entered the keypad responds with a bleep and
displays a T. When all the digits are entered, press the ent key to
start the setting routine.
ENTERING A PIN - USER LEVEL 3 - 6
As each digit is entered the keypad responds with a bleep and
displays a T. When all the digits are entered press the A > key to
start the setting routine.
SETTING GROUPS
Where group choice has been assigned to the PIN, select which
groups have to set as part of the setting routine. Entry of the PIN
followed by the A > key, displays the set status of each group on the
keypad screen .
Select which groups have to be to set by entering the number of the
group. For example, to set groups 2 and 3 press keys 2 and 3 . The
display changes to indicate the groups selected for setting. Pressing
the ent key starts the setting routine for the specified groups.
Galaxy 500 and 512
The Galaxy 500 has 16 groups whilst the 512 has 32 groups. If the
user has group choice, the available groups will be displayed at the
keypad following a valid code + A >. The groups will be displayed
showing A1 to A8. Use both A > and < B keys to scroll to the
various sets of groups.
EXIT TIME
If all the system zones are closed when the setting routine is started,
the display indicates the remaining time, in seconds, to vacate the
premises. Exit the building using the agreed route.
TIMED SET 120
Code + ent
SET A12345678
Groups UUU-----
SET A12345678
Groups SUU-----
TIMED SET 120
Code + A
1
ent
SET A12345678
Groups USS-----
SET B12345678
Groups USS-----
TIMED SET 60
Code + A
A Key
ent

Galaxy 8 Specifications

General

Brand	Galaxy
Model	8
Category	Security System
Language	English